Cisco CCNP Service Provider 300-510 dumps with PDF and VCE have been updated

Lead4Pass Cisco CCNP Service Provider 300-510 dumps have been updated to include the most popular PDF files and VCE practice exam engine to help you practice with the newly updated Cisco CCNP Service Provider 300-510 exam questions!

You are welcome to download the latest Lead4Pass Cisco CCNP Service Provider 300-510 dumps: https://www.leads4pass.com/300-510.html (135 Q&A)

Supply: Download the latest Cisco CCNP Service Provider 300-510 dumps PDF:https://drive.google.com/file/d/19b-Nohof0qdstULphIaMT_yvI3Ssc4L0/

Cisco CCNP Service Provider 300-510 dumps exam questions and answers:

New Question 1:

DRAG DROP

Compare different features between OSPFv2 and OSPFv3. Drag and drop the descriptions of OSPF from the left onto the correct OSPF versions on the right.

Select and Place:

Correct Answer:

Question 2:

DRAG DROP

An engineer is troubleshooting end-to-end customer traffic across an MPLS VPN service provider network.

Which tasks should the engineer use to solve the routing issues?

Drag and drop the table types from the left onto the most useful troubleshooting tasks/router types on the right. (Not all options are used.)

Select and Place:

Correct Answer:

Question 3:

DRAG DROP

Drag the IPv6 tunneling mechanisms on the left to match the correct manual or automatic tunneling category on the right.

Select and Place:

Correct Answer:

Question 4:

DRAG DROP

Drag and drop the features from the left into the order of operations for SRv6 SRH field creation and forwarding on the right.

Select and Place:

Correct Answer:

First – next header Second – routing type Third – segments left Fourth – last entry Fifth – segment list sixth – packet is forwarded

Question 5:

Refer to the exhibit. Which tree does multicast traffic follow?

A. shared tree

B. MDT default

C. source tree

D. MDT voice

Correct Answer: B

Question 6:

Refer to the exhibit. After you applied these configurations to routers R1 and R2, the two devices could not form a neighbor relationship. Which reason for the problem is the most likely?

A. The two routers cannot authenticate with one another.

B. The two routers have the same area ID.

C. The two routers have the same network ID.

D. The two routers have different IS-types.

Correct Answer: A

Question 7:

Refer to the exhibit. Which effect of this configuration is true?

A. It sets the keepalive timer to 30 seconds and the hold timer to 240 seconds.

B. It sets the keepalive timer to 30 milliseconds and the hold timer to 240 milliseconds

C. It sets the hold timer to 30 milliseconds and the keepalive timer to 240 milliseconds

D. It sets the hold timer to 30 seconds and the keepalive timer to 240 seconds

Correct Answer: A

Question 8:

Refer to the exhibit. A network operator is working to filter routes from being advertised that are covered under an aggregate announcement. The receiving router of the aggregate announcement block is still getting some of the more specific routes plus the aggregate.

Which configuration change ensures that only the aggregate is announced now and in the future if other networks are to be added?

A. Configure the summary-only keyword on the aggregate command

B. Set each specific route in the AGGRO policy to drop instead of suppress-route

C. Filter the routes on the receiving router

D. Set each specific route in the AGGRO policy to remove instead of suppress-route

Correct Answer: A

Question 9:

Refer to the exhibit. A network operator is getting the route for 10.11.11 0/24 from two upstream providers on #XR3. The network operator must configure #XR3 to force the 10.11.11.0/24 prefix to route via next hop of 10.0.0.9 as primary when available.

Which of these can the operator use the routing policy language for, to enforce this traffic forwarding path?

A. weight of 0 on the prefix coming from 192.168.0.2

B. lower local preference on the prefix coming from 192.168.0.2

C. higher local preference on the prefix coming from 192.168.0.1

D. weight of 100 on the prefix coming from 192.168.0.1

Correct Answer: A

Question 10:

Refer to the exhibit. After troubleshooting an OSPF adjacency issue, routers 1, 2, and 3 have formed OSPF neighbor relationships. Which statement about the configuration is true?

A. Router 2 receives a Type 5 LSAs from router 1 for its connected subnets

B. Router 2 uses router 3 as the next hop for 192.168.0.0/24

C. Router 2 uses router 1 as the next hop for 192.168.0.0/24

D. Router 2 receives a Type 7 LSAs from router 3 for its connected subnets

Correct Answer: A

Question 11:

What is used by SR-TE to steer traffic through the network?

A. shortest path calculated by IGP

B. dynamic rules

C. path policy

D. explicit maps

Correct Answer: C

Question 12:

For which reason can two devices fail to establish an OSPF neighbor relationship?

A. The two devices have different process IDs

B. The two devices have different network types

C. The two devices have different router IDs

D. The two devices have the same area ID

Correct Answer: B

Question 13:

Refer to the exhibit. Which LSA type is indicated by this router output?

A. type 3 LSA

B. type 4 LSA

C. type 1 LSA

D. type 2 LSA

Correct Answer: C

Question 14:

Which statement about enabling segment routing for IGPs is true?

A. Segment routing must first be enabled under then routing process and then globally

B. Segment routing must first be enabled globally and then under the routing process

C. Segment routing can be enabled only under the routing process

D. Segment routing can be enabled only globally

Correct Answer: B

Question 15:

Which task is performed when troubleshooting LDP?

A. Execute the ping utility to generate information about the MAC addresses used along the path

B. Verify that MPLS is disabled globally and enabled on the necessary interfaces in a per-interface basis

C. Execute the traceroute utility to generate information about the labels used along the path

D. Verify that Cisco Express Forwarding has been disabled on the network

Correct Answer: C

……

We strongly recommend that you download the latest Cisco CCNP Service Provider 300-510 dumps from Lead4Pass.com! Guaranteed to actually pass the exam.
Cisco CCNP Service Provider 300-510 PDf dumps and Cisco CCNP Service Provider 300-510 VCE dumps: https://www.leads4pass.com/300-510.html (135 Q&A)
(All objectives of the exam are covered in depth, so you can prepare for any question on the exam)

Supply: Download the latest Cisco CCNP Service Provider 300-510 dumps PDF:https://drive.google.com/file/d/19b-Nohof0qdstULphIaMT_yvI3Ssc4L0/

More IT certification blogs: [Amazon]awsexamdumps.com, [Oracle]oraclefreedumps.com, [Cisco]ciscofreedumps.com, [Microsoft]examdumpsbase.com, [Citrix]citrixexamdumps.com
[CompTIA]comptiafreedumps.com, [VMware]vmwarefreedumps.com, [IBM]ibmexamdumps.com, [HP]hpexamdumps.com, [NetApp]netappexamdumps.com, [Juniper]juniperexamdumps.com
[Fortinet]fortinetexamdumps.com