Practice for your Microsoft 70-741 exam with the help of lead4pass, latest Microsoft MCSA 70-741 dumps pdf materials and vce youtube demo update free shared. Microsoft MCSA 70-741 dumps exam preparation kit contains all the necessary 70-741 questions that you need to know. “Networking with Windows Server 2016” is the name of Microsoft MCSA Microsoft MCSA https://www.leads4pass.com/70-741.html exam dumps which covers all the knowledge points of the real Microsoft exam. High quality Microsoft MCSA 70-741 dumps exam questions and answers free download from lead4pass. 100% passing guarantee and full refund in case of failure.
Vendor: Microsoft
Certifications: MCSA
Exam Name: Networking with Windows Server 2016
Exam Code: 70-741
Total Questions: 125 Q&As
Download free latest Microsoft 70-741 dumps pdf materials: https://drive.google.com/open?id=0B_7qiYkH83VReFlheVBuU0JyeWc
Download free latest Microsoft 70-742 dumps pdf materials: https://drive.google.com/open?id=0B_7qiYkH83VRdDZZdGwtb0lTU3M
High Quality Microsoft MCSA 70-741 Dumps Exam Questions And Answers (1-20)
QUESTION 1
Your network contains an Active Directory domain named contoso.com. The domain contains three servers named Server1, Server2, and Server3 that run Windows Server 2016.
Server1 has IP Address Management (IPAM) installed. Server2 and Server3 have the DHCP Server role installed and have several DHCP scopes configured. The IPAM server retrieves data from Server2 and Server3.
A domain user named User1 is a member of the groups shown in the following table.
On Server1, you create a security policy for User1. The policy grants the IPAM DHCP Scope Administrator Role with the \Global access scope to the user.
Which actions can User1 perform? To answer, select the appropriate options in the answer area.
Hot Area:
Correct Answer:
QUESTION 2
Your network contains an Active Directory domain named adatum.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016. The domain contains three users named User1, User 2 and User 3.
Server 1 has a share named Share1 that has the following configurations.
The Share permissions for Share1 are configured as shown in Share1 Exhibit.
Share1 contains a file named File1.txt. The Advanced Security settings for File1.txt are configured as shown in the File1.txt exhibit.
Select the appropriate statement from below. Select Yes if the state is true , otherwise no.
Hot Area:
Correct Answer:
QUESTION 3
You have an internal network that contains multiple subnets.
You have a Microsoft Azure subscription that contains multiple virtual networks.
You need to deploy a hybrid routing solution between the network and the Azure subscription. The solution must ensure that the computers on all of the networks can connect to each other.
You install RAS Gateway and enable BGP routing on the network and in Azure.
Which three actions should you perform next in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
Correct Answer:
QUESTION 4
You have an Active Directory domain named Contoso.com. The domain contains Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. The Hyper-V hosts are configured to use NVGRE for network virtualization.
You have six virtual machines that are connected to an external switch. The virtual machines are configured as shown.
To which virtual machine or virtual machines can VM1 and VM3 connect? To answer, select the appropriate options in the answer area.
Hot Area:
Correct Answer:
QUESTION 5
You have a network policy server (NPS) server named NPS1. One network policy is enabled on NPS1. The policy is configured as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information in the graphic.
Hot Area:
Correct Answer:
QUESTION 6
Scenario:
You are a network administrator for a company named Contoso,Ltd. The network is configured as shown in the exhibit.
You install the Remote Access server role on Server2.
Server2 has the following configured.
*Network address translation (NAT)
*The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2
You identify the following requirements:
* Add 28 devices to subnet2 for a temporary project.
* Configure Server2 to accept VPN connections from the internet.
* Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.
End of Scenario:
You deploy a computer named Computer8 to subnet4. Computer8 has an IP address of 192.168.10.230 and a subnet mask of 255.255.255.240
What is the broadcast address for Subnet4? To answer, select the appropriate options in the answer area.
Hot Area:
Correct Answer:
QUESTION 7
Your network contains an Active Directory domain named contoso.com. The domain contains four servers named Server1, Server2, Server3, and Server4 than run Windows Server 2016. 70-741 dumps
Server1 has IP Address Management (IPAM) installed. Server2, Server3, and Server4 have the DHCP Server role installed. IPAM manages Server2, Server3, and Server4.
A domain user named User1 is a member of the groups shown in the following table.
Which actions can User1 perform? To answer, select the appropriate options in the answer area.
Hot Area:
Correct Answer:
QUESTION 8
You are deploying Direct Access to a server named DA1. DA1 will be located behind a firewall and will have a single network adapter. The intermediary network will be IPv4.
You need to configure the firewall to support DirectAccess.
Which firewall rules should you create for each type of traffic. To answer, drag the appropriate ports and protocols to the correct traffic types.
Select and Place:
Correct Answer:
QUESTION 9
You have two servers named Server1 and Server2 that run Windows Server 2016.
Server1 has the DNS Server role installed. The advanced DNS properties for Server1 are shown in the Advanced DNS exhibit. (Click the Exhibit button.)
Server2 is configured to use Server1 as a DNS server. Server2 has the following IP configuration.
Select the appropriate selection if statement is “Yes” or No.
Hot Area:
Correct Answer:
QUESTION 10
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. You enable Response Rate Limiting on Server1. You need to prevent Response Rate Limiting from applying to hosts that reside on the network of 10.0.0.0/24.
Which cmdlets should you run? To answer, select the appropriate options in the answer area.
Hot Area:
Correct Answer:
QUESTION 11
On a DNS server that runs Windows Server 2016, you plan to create two new primary zones named adatum.com and contoso.com. You have the following requirements for the zones:
• Ensure that computers on your network can register records automatically in the adatum.com zone.
• Ensure that records that are stale for two weeks are purged automatically from the contoso.com zone.
What should you configure for each zone? To answer, select the appropriate options in the answer area.
Hot Area:
Correct Answer:
QUESTION 12
\\Server1.adatum.com\namespace1 has a folder target named Folder1. A user named User1 has Full Control share and NTFS permissions to Folder1.
Folder1 contains a file named Filel.doc User1 has only Write NTFS permissions to Filel.doc
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
Hot Area:
Correct Answer:
QUESTION 13
You are configuring internal virtual networks to support multitenancy communication between tenant virtual machine networks and remote sites.
You have a tenant named Tenant1.
You need to enable Border Gateway Protocol (BGP) for Tenant1.
Which commands should you run? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
Correct Answer:
QUESTION 14
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has two network adaptors named NK1 and NIC2. Server2 has two virtual switches named vSwitch1 and vSwitch2. N1C1 connects to vSwitch1. NIC2 connects to vSwitch2 Server1 hosts a virtual machine named VM1. VM1 has two network adapters named vmNIC1 and vmNIC1. VmNIC1 connects to vSwitch1. VmNIC2 connects to vSwitch2.
You need to create a NIC team on VM1.
What should you run on VM1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
Correct Answer:
QUESTION 15
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1.
Server1 configured to use a forwarder named server2.contoso.com that has an IP address of 10.0.0.10.
You need to prevent Server1 from using root hints if the forwarder is unavailable.
What command should you run? To answer, select the appropriate options in the answer area.
Hot Area:
Correct Answer:
QUESTION 16
Server1 provides DNS name resolution to both internal and external clients. Server1 hosts the primary zone for contoso.com.
You need to configure Server1 to meet the following requirements:
* Internal clients must be able to use Server 1 to resolve internal-based DNS names.
* External clients must not be able to use Server1 to resolve Internal-based DNS names.
* External clients must able to use Server1 to resolve names in the contoso.com zone.
Which commands should you run on Server1.? To answer select the appropriate option in answer area.
Hot Area:
Correct Answer:
QUESTION 17
You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 are connected to the same network.
On Server1 and Server2, you create an external network switch named Switch1.
You have the virtual machine shown in the following table.
All three virtual machines are connected to Switch1.
You need to prevent applications in VM3 from being able to capture network traffic from VM1 or VM2. The solution must ensure that VM1 retains network connectivity.
What should you do?
A. Configure network virtualization for VM1 and VM2.
B. Modify the subnet mask of VM1 and VM2.
C. On Server2, configure the VLAN ID setting of Switch1.
D. On Server2, create an external switch and connect VM3 to the switch.
Correct Answer: A
QUESTION 18
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN server. 70-741 dumps
Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00 everyday of the week.
You need to ensure that domain users can establish VPN connections only between Monday and Friday.
Solution: From Server Manager, You modify the Access Policies on Server1.
Does this meet the goal?
A. Yes
B. No
Correct Answer: A
QUESTION 19
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest has three sites located in London, Paris and Berlin.
The London site contains a web server named Web1 that runs Windows Server 2016.
You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.
Solution: You install the Deployment Server role service, and then you restart the World Wide Web Publishing Service.
Does this meet the goal?
A. Yes
B. No
Correct Answer: A
QUESTION 20
You have an IP Address Management (IPAM) deployment that is used to manage all of the DNS servers on your network. IPAM is configured to use Group Policy provisioning.
You discover that a user adds a new mail exchanger (MX) record to one of the DNS zones.
You want to identify which user added the record.
You open Event Catalog on an IPAM server, and you discover that the most recent event occurred yesterday. You need to ensure that the operational events in the event catalog are never older than one hour.
What should you do?
A. From the properties on the DNS zone, modify the refresh interval.
B. From an IPAM_DNS Group Policy object (GPO), modify the Group Policy refresh interval.
C. From Task Scheduler, modify the Microsoft\Windows\IPAM\Audit task.
D. From Task Scheduler, create a scheduled task that runs the Update-IpamServer cmdlet.
Correct Answer: A
Why Choose/Select Lead4pass?
Lead4pass is the best provider of IT learning materials and the right choice for you to prepare for Microsoft 70-741 exam. Other brands started earlier, but the price is relatively expensive and the questions are not the newest. Lead4pass provide the latest real questions and answers with lowest prices, help you pass Microsoft 70-741 exam easily at first try.
Latest Microsoft MCSA 70-741 dumps exam practice files and study guides in PDF format free download from lead4pass. The best and most updated latest Microsoft MCSA https://www.leads4pass.com/70-741.html dumps pdf training resources which are the best for clearing 70-741 exam test, and to get certified by Microsoft MCSA. It is the best choice for you to pass Microsoft 70-741 exam.
The Following Are Some Reviews From Our Customers:
