[Latest Questions] Which is the Latest Cisco CCNA Collaboration 210-060 Dumps Exam Questions And Youtube

Which is the latest Cisco CCNA Collaboration 210-060 dumps exam questions? Get the latest Cisco CCNA Collaboration 210-060 dumps pdf training resources and study guides free download from lead4pass. Newest helpful Cisco CCNA Collaboration 210-060 dumps pdf materials and vce youtube demo update free shared. “Implementing Cisco Collaboration Devices v1.0” is the name of Cisco CCNA Collaboration https://www.leads4pass.com/210-060.html exam dumps which covers all the knowledge points of the real Cisco CCNA Collaboration. The best useful Cisco CCNA Collaboration 210-060 dumps exam practice questions and answers download free try, pass Cisco 210-060 exam test easily at first attempt.

Latest Cisco 210-060 dumps pdf training materials: https://drive.google.com/open?id=0B_7qiYkH83VRSHJTTV9NMjQ0dmc

Latest Cisco 210-260 dumps pdf training materials: https://drive.google.com/open?id=0B_7qiYkH83VRcnI0SE83bHBvQ1k
210-060 dumps

The Best Cisco CCNA Collaboration 210-060 Dumps Exam Questions And Answers (21-50)

QUESTION 21
A network engineer must set up an end-user account for a SIP device to use for authentication. Which end-user information is used for SIP authentication?
A. account ID
B. password
C. PIN
D. digest credentials
Correct Answer: D

QUESTION 22
A systems administrator wants to integrate a new Cisco Unity Connection cluster with an existing directory in the enterprise. What is one valid user import source?
A. Cisco Unified Communications Manager AXL server
B. Cisco Unified Communications Manager CTI server
C. Cisco Unified Communications Manager TFTP server
D. Cisco Unified Communications Manager MOH server
Correct Answer: A

QUESTION 23
A field technician must reset a single 7965 IP phone so that it will be discovered on the network again and request an IP address from DCHP. Which steps should the network engineer provide?
A. Have field technician select the Settings button on phone, then dial # # * * *
B. Have field technician select the Settings button on phone, then dial # # * # #
C. Have field technician select the Settings button on phone, then dial * * # * *
D. Have field technician select the Settings button on phone, then dial * * # # #
Correct Answer: C

QUESTION 24
An administrator wants to gauge the load and performance capacity of Cisco Unified Communication Manager devices, including conference bridges, gateways, and trunks. Which report would the administrator run?
A. CAR
B. CDR
C. SIP
D. RTMT
E. CUBE
Correct Answer: A

QUESTION 25
An end user has an 7945 IP phone, but is unable to launch any of the IP phone applications. 210-060 dumps A network engineer has confirmed that the device is subscribed to the appropriate applications in Cisco Unified Communications Manager.
How should the engineer instruct the user to launch the IP phone applications?
A. Select the andquot;?andquot; button on the IP phone.
B. Select the globe button on the IP phone.
C. Select Settings andgt; User Preferences.
D. Select Settings andgt; Device Configuration.
Correct Answer: B

QUESTION 26
Which two user types are available to a voice engineer adding a user in Cisco Unity Connection? (Choose two.)
A. User with mailbox
B. Imported user
C. Synch user
D. User without mailbox
E. Local admin user with mailbox
Correct Answer: AD

QUESTION 27
Which two components are needed before a user can be assigned to a Presence node? (Choose two.)
A. Cisco Unified Communications Service
B. service profile
C. phone button template
D. mobility profile
E. device profile
Correct Answer: AB

QUESTION 28
To control telephony costs, management wants to restrict who can place long distance calls. Which two options allow for this restriction? (Choose two.)
A. calling search space
B. partitions
C. route groups
D. SIP trunk
E. gateway
Correct Answer: AB

QUESTION 29
Which profile must be added to the end user profile when enabling an end user for Cisco Unified Presence?
A. Device profile
B. UC service profile
C. Extension mobility profile
D. SIP profile
Correct Answer: B

QUESTION 30
Users report that no phone numbers are listed in the corporate directory, but the employee names are listed. Which option must be verified in Cisco Unified Communications Manager Administration to display the directory numbers?
A. The primary extension is configured.
B. The user\’s phones are listed as a controlled device.
C. Users are associated with their directory number.
D. The telephone number field has been filled in appropriately.
Correct Answer: D

QUESTION 31
Use the exhibits below to answer the question.
210-060 dumps
210-060 dumps
210-060 dumps
What two issues could be causing the Cisco Jabber failure shown in the exhibit? 210-060 dumps (Choose two)
A. Incorrect username and password
B. IM andamp; Presence server is down
C. User is not associated with the device
D. IP or DNS name resolution issue
E. CSF Device is not registered
F. IP Phone DN not associated with the user
Correct Answer: BD

QUESTION 32
Which options are two on-premise components of Cisco Unified Presence? (Choose two.)
A. Cisco Unified Communication Manager
B. Cisco Unified Contact Center Express
C. Cisco WebEx
D. Cisco Quality Management
E. Cisco Unified Contact Center Enterprise
Correct Answer: AC

QUESTION 33
Which two benefits does Cisco Unified IM and Presence Service bring to businesses? (Choose two.)
A. enhances productivity by using availability awareness and reduce communications delays
B. provides Enterprise IM capabilities, such as persistent chat, group chat, and IM history
C. provides and streamlines enterprise audio and video communications
D. enhances communications by providing multipoint conference capabilities
E. supports standard-based XMPP clients by supporting native SIP/SIMPLE and H.323 protocols
Correct Answer: AB

QUESTION 34
A voice engineer wants to monitor system activities using the RTMT tool.
Which step is next after navigating to Cisco Unified Reporting?
A. system andgt; scheduler andgt; CDR
B. system reports andgt; unified CM data summary andgt; generate report
C. system andgt; tools andgt; reports
D. tools andgt; CDR analysis and reporting
Correct Answer: B

QUESTION 35
Which type of template should be used when a network engineer adds a new call center agent in the Cisco Unity Connection?
A. Contact
B. Call handler
C. User
D. Notification
Correct Answer: C

QUESTION 36
A single user receives a high amount of inbound voice messages and checks them only via email. The user cannot receive or send messages as the mailbox is full. Which option provides a permanent solution to this problem?
A. message aging policies
B. mailbox size quota
C. multiple mailbox stores
D. call-routing rules
E. restriction tables
Correct Answer: A

QUESTION 37
Which CAR module report provides key information to determine if an additional gateway is needed?
A. gateway utilization
B. gateway summary
C. gateway detail
D. gateway and line group utilization
Correct Answer: A

QUESTION 38
Which IM and Presence chat feature allows for an always-available chat room that remains active, even if all of the participants leave the chat? 210-060 dumps
A. Personal
B. Group
C. Persistent
D. Ad-hoc
Correct Answer: C

QUESTION 39
In which section of Cisco Unified Communications Manager are Call Detail Records viewed?
A. Cisco Unified Serviceability
B. Cisco Unified OS Administration
C. Cisco Unified Reporting
D. Cisco Unified Communications Manager Administration
E. Cisco Unified Disaster Recovery
Correct Answer: A

QUESTION 40
Which Cisco Unity Connection user field is used to map to an LDAP directory?
A. SMTP Address
B. Last Name
C. Alias
D. Display Name
Correct Answer: C

QUESTION 41
Which four actions can be selected with the Bulk Administration Tool in Cisco Unity Connection? (Choose four.)
A. Create
B. Modify
C. Migrate
D. Update
E. Delete
F. Export
G. Purge
H. Manage
Correct Answer: ADEF

QUESTION 42
An entire department is reporting frequent calls with poor voice quality. Which fault domain should be investigated first?
A. IP phone
B. Cisco Unified Communications Manager Media Resources
C. Cisco Unified Communications Manager SIP Trunks
D. network routers and switches
Correct Answer: D

QUESTION 43
Which component is needed for a voice call to be processed between the enterprise Cisco Unified Communications system and a cell phone via the PSTN?
A. Cisco Analog Voice Gateway VG224
B. Cisco Unified Communications Manager call processing node
C. Cisco Unified Communications Manager Music On Hold node
D. Cisco Integrated Service Router with digital signal processor resources
Correct Answer: D

QUESTION 44
An engineer needs to block any outbound calls to specific numbers. Which dial plan element is used to restrict called numbers?
A. partition
B. route group
C. route list
D. calling search space
Correct Answer: D

QUESTION 45
An administrator wants to add and configure an ephone-dn via the Cisco Unified Communications Manager Express web GUI. Which feature must be defined under telephony service configuration?
A. auto-reg-ephone
B. auto-reg-dn
C. max-ephones
D. max-dn
E. dn-webedit
Correct Answer: E

QUESTION 46
Which four devices can be used to provide analog ports, traditional phones, and fax machines? 210-060 dumps (Choose four.)
A. Cisco VG224 Analog Voice Gateway
B. Foreign Exchange Station Voice Interface Card
C. Cisco High Density VoiceFax Network Module
D. Cisco ATA190 Analog Telephone Adapter
E. Cisco VG350 Analog Voice Gateway
F. Cisco Unified Border Element
G. Foreign Exchange Office Voice Interface
Correct Answer: ABDE

QUESTION 47
Customer requirements dictate that local calls from area code 408 display the ANI as a 7-digit number. Which procedure allows the leading digits to be stripped as soon as they arrive at the H.323 voice gateway?
A. Set up a voice translation rule, apply the translation rule to a translation profile, and apply the translation profile to the dial peer in the inbound direction.
B. Set up a voice translation profile, apply the translation profile to a translation rule, and apply the translation rule to the dial peer in the outbound direction.
C. Set up a voice translation rule, apply the translation rule to a translation profile, and apply the translation profile to the dial peer in the outbound direction.
D. Set up a voice translation profile, apply the translation profile to a translation rule, and apply the translation rule to the dial peer in the inbound direction.
Correct Answer: A

QUESTION 48
An administrator has determined that an end user is experiencing jitter. Which symptom is the end user experiencing?
A. choppy
B. crosstalk
C. static
D. screeching
Correct Answer: A

QUESTION 49
An engineer is adding four cordless analog phones to Cisco Unified Communications Manager. Which solution best meets this requirement?
A. Cisco VG202 Analog Voice Gateway
B. Cisco VG204 Analog Voice Gateway
C. Cisco VG224 Analog Voice Gateway
D. Cisco VG350 Analog Voice Gateway
Correct Answer: B

QUESTION 50
What is the interface type that you should use to connect a PSTN analog line to the VoIP network?
A. FXS
B. FXO
C. E and M
D. Serial
Correct Answer: B

Here Are Some Reviews From Our Customers:

210-060 dumps

The best and most updated useful Cisco CCNA Collaboration 210-060 dumps exam practice files in PDF format free download from lead4pass. High quality latest Cisco CCNA Collaboration https://www.leads4pass.com/210-060.html dumps pdf training resources which are the best for clearing 210-060 exam test, and to get certified by Cisco CCNA Collaboration, download one of the many PDF readers that are available for free.

Why Select Lead4pass?

Lead4pass is the best IT learning material provider. Other brands appeared early, the questions are not the latest and it is very expensive. Lead4pass provide the newest and cheapest questions and answers. Lead4pass is the correct choice for IT learning materials, help you pass your exam easily.
210-060 dumps